Requirements
2-3
Setting Up and Starting a CX700 System
Il contenitore è pesante e dev'essere installato nel rack da due
persone. Per evitare danni personali e/o all’apparecchiatura, non
tentare di sollevare ed installare in un rack il contenitore senza un
sollevatore meccanico e/o l’aiuto di un’altra persona.
Debido a su considerable peso, la instalación del compartimento en
el bastidor deben realizarla siempre dos personas. Para evitar daños
personales o en el equipo, el compartimento no debe levantarse ni
instalarse en el bastidor sin la ayuda de un elevador mecánico o de
otra persona.
We recommend that you use cabinet anti-tip devices, especially if you
are installing or removing a CX700 or DAE in the upper half of the
cabinet when the lower half is empty. Figure 2-1 shows a CX700 and
four DAE enclosures installed in a cabinet.
Figure 2-1
Sample CX700 Installation (Rear View with Four DAEs)
Site Requirements
For proper CX700 operation, the installation site must conform to
certain environmental specifications, which are detailed in
Appendix A.
EMC2699
DAE2
DAE2
DAE2
DAE2
CX700
SPS
Summary of Contents for CLARiiON CX700
