background image

7

Disposable mini-rack

Document kit inventory list

Disk-array enclosure

Doc kit: Installation guide

Control Station

Read Me First

Standby power supply

Cabling diagrams

Storage processor enclosure

Environmental compliance information

Blade enclosure

Notices

Accessory box  1

Media kit inventory list

Accessory kit docs and bezels 

Applications and Tools CD

Power cables

Software CD

Standby power supply interconnect cable kit 

User documentation CD

Crossover cable

Getting Started with Celerra

Serial cable

Note:  

The shaded areas in the table represent separate containers, packages, and boxes. 

If additional accessory boxes are necessary, they will be shipped separately. 

For more information, refer to Celerra Tools on http://Powerlink.EMC.com

LAN1

LAN2

Disk-array

enclosure

Standby power

supply

Control Station

Blade enclosure

Document kit inventory list
and Media kit inventory list

Storage processor

Disposable

mini-rack

IMPOR

TANT

User Documentation

Accessory box 

CIP-1038MOD

Remove this label and

 paste it on page 2

of this guide.

Contents of the disposable mini-rack  

Summary of Contents for Celerra NS20FC

























Reviews: