EMC-PARTNER AVI3000 User Manual Download Page 45 | Manualshive

Page: 45 / 45

EMC-PARTNER AVI3000 User Manual Download Page 45

11 Appendix

11 Appendix

11.1 Recycling / Disposal

RoHS directive 2011/65/EU

The system complies with the directive 2011/65/EU (RoHS - Restriction of certain Hazardous
Substances). From December 2005, all EMC PARTNER products either hand soldered or by
machine are produced using lead-free solder.

WEEE directive 2012/19/EU

The system is exempted from the directive 2012/19/EU (WEEE) under category 9. The product
should be recycled through a professional organization with appropriate experience for the disposal
and recycling of electronic products. EMC PARTNER is also available to help with questions
relating to the recycling of this product.

Dismantling

There is no special danger involved in dismantling.

Parts which can be recycled

The system contains parts made from steel, aluminium, PVC, two-component sealing compound.
The impulse capacitors are filled with non-poisonous mineral oil. The various parts can be separated
and recycled.

Parts which cannot be recycled

None

Page 45/45

«
...
43
44
45

Summary of Contents for AVI3000














































Reviews:

No comments