25
Serial/Ethernet/USB Communication (SCOM) Interface
IND100084-18
"ODM" - Outdoor Mode
This command shall set the GDC outdoor mode. The outdoor mode will add 5 second delay to the GDC buttons.
However this 5s press is not needed again if 5s does not elapse since last button usage (If one button has been held
for more than 5s, any button will respond instantly. If there is user absence for more than 5s ODM is activated again).
Byte #
0
1
2
3
4
5
6
7
8
0x07 0xFF 0x4F 0x44 0x4D 0x01 IHCHK OUT IDCHK
OUT:
Describes the status of the OUT variable
Range: Valid levels in table:
0x00
Turn off the outdoor mode
0xFF
Turns on the outdoor mode
After unit reset the value is set to: Nothing is stored.
After microcontroller reset the value is set to: Nothing is stored.
Write:
Sets the outdoor mode to on or off.
Example:
Deactivate Outdoor Mode:
0x07
0xFF
0x4F
0x44
0x4D
0x01
0x18
0x00
0xFF
ACK reply from unit:
0x06
0xFF
0x4F
0x44
0x4D
0x01
0x19
0x00
0xFF