EMBRON Hatteland HT20 70 Series, User Manual

Page: 56 / 154

56
IND100129-180
All specifications are subject to change without prior notice!
PCA100298-1
Specifications - LAN Module
1/2
This information may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Technology
AS. The products may not be copied or duplicated in any way.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG fi le.
DATASHEET
Hatteland Technology AS | www.hattelandtechnology.com | Enterprise no: NO974533146
Note: Product below for illustration only. Location of module and product size/design may differ. Connector/pinning remain the same.
Illustration and Pinning:
2 x LAN RJ-45 - Internal Module
Manufacturer: Hatteland Technology AS
Product: Internal LAN Module RJ-45
Typenumber:
PCA100298-1
Last Revised: 27 Apr 2022
Revision#: 12
Features:
The Hatteland Technology USB->Ethernet module provide the system with dual independent Ethernet ports. The module is connected
internally to the motherboard via standard USB interfaces. Application software access the ethernet channels as standard ethernet
devices, i.e. in the normal case is there no requirements for additional software development. This module can be integrated, electrical
and mechanical, for the product such as Series X G1/G2 Panel Computers and selected Stand-alone Computers (Please check datasheet
for your unit if PCA100298-1 is listed as part of Factory Options).
Description:
Internal 2 x USB to 2 x RJ-45
• Connector 1kV Isolated RJ-45, 8-pin connector and pinning.
Each port as two LED reporting status of transmit/receive
• Power Consumption Max 326mA @ 5V
• Test and certificate Hatteland Technology standard, (tested / type approved by the following classification societies):
IEC 60945 4th (EN 60945:2002), IACS E10,
EU RO MR - Mutual Recognition, ClassNK - Nippon Kaiji Kyokai
• Supported
Operating Systems (OS)
Embedded Enterprise (WEE): Microsoft® Windows® Server 2003/2008/2008R2 (Eng),
Microsoft® Windows® 2003/2008/2008R2 (Eng), Microsoft® Windows® 7 Professional/Ultimate
(Eng, SP1), Windows® 10 IoT Enterprise 2016 LTSB.
Linux: Kernel 3.0.0-64 or above
• Drivers https://www.hattelandtechnology.com/drivers?key=20.2.14.57.X.X.X
https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=105;71;101&PLine=71
Note: Listed Operating Systems above are hardware/platform dependent. Please check datasheet for specific unit if OS is supported.
- USB 2.0 and 1.1 Standard Compliant.
- Two internal USB ports are required.
- IEEE 802.3 10Base-T/100 Base-T compatible.
Note: Wake-on-lan is not supported.
8-pin RJ-45 10/100Mbps LAN/Ethernet
PCA100298-1 / HT 00274 OPT-A1
1 2 3 4 5 6 7 8
Pin 01 - TDP Transmit Diff erential Pair (Positive)
Pin 02 - TDN Transmit Diff erential Pair (Negative)
Pin 03 - RDP Receive Diff erential Pair (Positive)
Pin 04 - NC Not Connected
Pin 05 - NC Not Connected
Pin 06 - RDN Receive Diff erential Pair (Negative)
Pin 07 - NC Not Connected
Pin 08 - NC Not Connected