EMBRON Hatteland E Series, User Manual, Page: 99 / 136

99 Appendix
IND100077-164
Power Mode / COM Config
Power Mode
Power mode is configurable under BIOS setup menu.
Advanced -> SCOM BUS Configuration -> Power Mode
• Always On (AT Mode)
(Computer will start when external power is applied, valid in next power-recycle)
• Power Button Only (ATX Mode)
(Computer will only start when power button is pressed, valid in next power-recycle)
• Previous State
(Computer will start when power button is pressed or if it was running before power was lost, valid in
next power-recycle)