4 Setting Up the VCB
Emblaze-VCON VCB5 User’s Guide
13
4
S
ETTING
U
P
THE
VCB
This chapter provides instructions for setting the VCB configuration in the VCB
Configuration program, and describes the properties so that you can set up the most
suitable configuration for your installation.
4.1 VCB Settings
The
Settings
tab contains general device configuration. These appear under the
MCU Settings and Administrators categories.
MCU Settings
³
To display MCU Settings
1
After logging in, click the
Settings
tab and then
MCU Settings
.
2
On this page, you can edit the parameters listed below. The other
parameters are read-only and cannot be edited in the VCB Configuration
program (for descriptions, see page
).
Description
Identity of the VCB. This name will appear in the MXM
Administrator after the login process is finished.
Location
Physical location of the VCB.
Gatekeeper
Address
IP address of the MXM or H.323 gatekeeper.
Defaults
Click to restore the default port configuration.
RTP Ports
Start At
The lowest port number allocated for video and audio
during videoconferences.
This allocation meets the Real-Time Protocol (RTP) and
Real-Time Control Protocol (RTCP) specifications,
which enable applications to synchronize and spool
audio and video information.
H.245 Port
Range
The lowest port number allowed for end-to-end
signalling of multimedia during videoconferences
This allocation provides for H.245 functions, such as
capability exchange, signalling of commands and
indications, and messages to open and fully describe the
content of logical channels.
