Embest Technology
Copyright © 2014-2015 Embest Technology SBC9000 User Manual
52
Table 6-1
Button test information
Input driver version is 1.0.1evdev: (EVIOCGBIT): Suspicious buffer size
511, limiting output to 64 bytes. See
http://userweb.kernel.org/~dtor/eviocgbit-bug.html
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "gpio-keys"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 102 (Home)
Testing ... (interrupt to exit)
Event: time 278.544212, type 1 (Key), code 102 (Home), value 1
Event: time 278.544220, -------------- Report Sync ------------
Event: time 278.714484, type 1 (Key), code 102 (Home), value 0
Event: time 278.714487, -------------- Report Sync ------------
Event: time 279.080212, type 1 (Key), code 102 (Home), value 1
Event: time 279.080217, -------------- Report Sync ------------
Event: time 279.293936, type 1 (Key), code 102 (Home), value 0
Event: time 279.293940, -------------- Report Sync ------------
The “value 1” in the table above indicates the button was pushed, the “value 0” indicates
the button was released.
6.3 Touchscreen Test
1
)
Execute the following instruction to run touchscreen calibration program after
SBC9000 boots up, then tap the symbols
“+” displayed on the screen to finish
calibration;
root@sbc9000:~#
ts_calibrate
2
)
After calibration completed, execute the following instruction to run test programs and
follow the prompts on the screen to finish test by drawing points and lines;
root@sbc9000:~#
ts_test
6.4 RTC Test
1
)
Execute the following instruction to set the system clock of SBC9000 to 5 pm, 11
th
of