Embest SBC8600B, Quick Start Manual

Page: 93 / 126

Page | 86
Insert a TF card and reboot the system. And then, the system will boot from
the TF card. Press the space button and enter EBOOT menu. To select boot
device and LCD module display output, follow these steps:
Enter EBOOT menu
CCCCCCCC
Texas Instruments Windows CE SD X-Loader33X
Built Jul 27 2012 at 11:25:59
Version BSP_WINCE_ARM_A8 02.30.00.03
open ebootsd.nb0 file
Init HW: controller RST
SDCARD: requested speed 1000000, actual speed 1000000
SDCARD: requested speed 25000000, actual speed 19200000
read ebootsd.nb0 file
jumping to ebootsd image
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Jul 27 2012
11:23:05
I2C EEPROM returned wrong magic value 0xffffffff
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x8409
Texas Instruments Windows CE EBOOT for AM33x, Built Jul 27 2012 at 11:25:53
EBOOT Version 0.0.1, BSP BSP_WINCE_ARM_A8 02.30.00.03
AHCLKX pinmux:0
AHCLKX CTRL:0x8001
pin function:0x0
pin dir:0x8000000
TI AM33X
ecc type:3
System ready!
Preparing for download...
INFO: Predownload....
Checking bootloader blocks are marked as reserved (Num = 18)
BOOT_CFG_SIGNATURE is different, read -1, expect 1111705159
WARN: Boot config wasn't found, using defaults
INFO: SW3 boot setting: 0x04
IsValidMBR: MBR sector = 0x480 (valid MBR)
OpenPartition: Partition Exists=0x1 for part 0x20.
>>> Forcing cold boot (non-persistent registry and other data will be wiped) <<<