Embertec Emberplug AV Instruction Booklet Download Page 18

18

and it has been discontinued, we will replace it with similar equipment of equal or greater value, 

subject to the overall maximum set forth below. We will pay for all shipping costs incurred in 

connection with the delivery of any repaired or replacement equipment to you, subject to the overall 

maximum set forth below.
What does this limited connected equipment warranty not cover?  
this limited connected equipment warranty does not cover:
•   any damage to connected equipment caused by improper use of the embertec emberplug 

or the connected equipment, accidents, acts of god (such as lightning strikes, floods or 

earthquakes), or normal wear and tear of the embertec emberplug or the connected equipment.  

For purposes of this warranty, “improper use” means not installing or operating the embertec 

emberplug in accordance with the manual, or not installing or operating the connected 

equipment in accordance with its manual.

•   any damage to equipment that is not properly connected to an embertec emberplug, or 

damage to equipment connected to an embertec emberplug that is not properly connected to 

an aC power line with a protective ground.

•   any damage to equipment connected to an embertec emberplug that had previously experienced 

another Occurrence. after each Occurrence, the embertec emberplug must be replaced.

•   any damaged equipment that has been disposed before we have examined the equipment at 

the site where the damage occurred (or notified you that we would not be visiting the site), and 

elected whether to repair or replace it or pay for its replacement value, all in accordance with the 

terms set forth above.

•   any damage to satellite dishes.

THE MAXIMUM CUMULATIVE AMOUNT WE WILL PAY FOR ALL REPAIRS, 

REPLACEMENT AND SHIPPING COSTS FOR ANY AND ALL DAMAGED 

EQUIPMENT QUALIFYING UNDER THIS WARRANTY SHALL NOT EXCEED 

TWENTY THOUSAND DOLLARS ($20,000).

any incidental, consequential, special or other indirect damages are not recoverable under this 

warranty. some states do not allow the exclusion of incidental or consequential damages, so the 

foregoing limitation may not apply to you. 
if the connected equipment is covered an applicable homeowner’s or renter’s insurance policy, we 

reserve the right to be subrogated under such policy. in addition, this warranty shall not apply to 

any damaged equipment covered under the manufacturer’s warranty.
How do you file a claim under this limited connected equipment warranty?  to file a claim for 

connected equipment qualifying under this warranty, visit www.embertec.us or call (831)708-2621 

and provide a full description of the damage.
this warranty gives you specific legal rights. You may also have other rights which vary from state 

to state.
Please register your embertec emberplug with us at www.embertec.us. Product registration is 

not a condition to coverage under either our limited product warranty or our limited connected 

equipment warranty.

Summary of Contents for Emberplug AV





















Reviews: