Ember GW03, Instructions Manual, Page: 12 / 24

12
1. Press ‘WiFi Setup’ and you will
be directed to the WiFi Setup
screen.
If the WiFi light on the gateway is
solid green you can go directly to
the Gateway Code option.
If you have an invite code, press
‘Invite Code’ and enter the code
to access the home.
2. If you are an installer select the
‘Installer’ option. If you are the
home owner select the ‘Home
owner’ option.
Note: If you select “Installer” you will
set the system up as normal, you can
then invite the Homeowner. When the
homeowner uses the invite code you will
be removed from the system and they will
take over.
Initial Setup