Embention Veronte PCS, Manual

Page: 34 / 37

Veronte PCS
Fig. 3:
Remove screws and battery holder bar
4. Now the battery can be replaced. Please take care with the polarity. The possitive cable is red marked.
5. To close the device make the same steps in a reverse way. Use Loctite 243 to fix all screws and apply 1Nm torque.
4.3 Contact data
You can contact Embention in any moment if you need further help and support from the acquired products. You can
do that through email, telephone or by visiting our office.
Embention contact data is as follows:
Email:
support@embention.com
Telephone: (+34) 965 421 115
Address:
Polígono Industrial Las Atalayas, C/ Chelín, Nº 16, CP 03114, Alicante (España).
Veronte PCS is a rugged control station hardware designed for outdoors use. The aluminium enclosure with IP54
protection permits the operation of the system in all weather conditions by protecting the datalink and other electronics
from rain and harsh environments.
The whole system is delivered in a wheeled rugged case for easy transportation and storage. The foldable mast included
can be extended up to 3m, rising the radio modules and antennas for maximizing the datalink LOS. Furthermore,
the embedded Veronte BCS includes all sensors needed for professional drone operations, enabling RTK, differential
barometer, operations from moving vehicles, relative missions...
30 Chapter 4. Maintenance