background image

Chapter:

 BIOS Settings 

Chipset 

page 72 

ADL Embedded Solutions 

ADLQM67HDS

 

4.4.2.1.1  LCD Control 

 

                 Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. 
                    Chipset 
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐ 
│  LCD Control                                                    │Select the Video Device which   │ 
│                                                                 │will be activated during POST.  │ 
│  Primary IGFX Boot Display            [CRT]                     │This has no effect if external  │ 
│  Secondary IGFX Boot Display          [Disabled]                │graphics present.               │ 
│  LCD Panel Type                       [VBIOS Default]           │Secondary boot display          │ 
│  Spread Spectrum clock Chip           [Off]                     │selection will appear based on  │ 
│  ALS Support                          [Disabled]                │your selection.                 │ 
│                                                                 │VGA modes will be supported     │ 
│                                                                 │only on primary display         │ 
│                                                                 │                                │ 
│                                                                 │                                │ 
│                                                                 │                                │ 
│                                                                 │────────────────────────────────│ 
│                                                                 │→←: Select Screen               │ 
│                                                                 │↑↓: Select Item                 │ 
│                                                                 │Enter: Select                   │ 
│                                                                 │+/-: Change Opt.                │ 
│                                                                 │F1: General Help                │ 
│                                                                 │F2: Previous Values             │ 
│                                                                 │F3: Optimized Defaults          │ 
│                                                                 │F4: Save & Exit                 │ 
│                                                                 │ESC: Exit                       │ 
│                                                                 │                                │ 
│                                                                 │                                │ 
│                                                                 │                                │ 
│                                                                 │                                │ 
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘ 
                  Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. 

 

 

Primary IGFX Boot Display 

Options: 

VBIOS Default / CRT / EFP / LFP / EFP3 / EFP2 / LFP2 

 

Secondary IGFX Boot Display 

Options: 

VBIOS Default / CRT / EFP / LFP / EFP3 / EFP2 / LFP2 

 

LCD Panel Type 

Options: 

VBIOS Default / 640x480 LVDS ...1920x1080 LVDS / 2048x1536 LVDS 

 

Spread Spectrum Clock Chip 

Options: 

Off / Hardware / Software 

 

ALS Support 

Options: 

Disabled / Enabled 

Summary of Contents for ADLQM67HDS

































































































Reviews: