Embedded Systems LM5p-GSM Product Manual Download Page 53

Page: 53 / 291

4.4.

Admin mode: adding/removing/administering apps

Enter admin mode by clicking on Admin icon

and entering the password.

Password

admin

Change admin password

Once in admin mode, click on Settings icon

and press

Change admin password

button.

Another setting here is

Allow users to show/hide apps

which will enable/disable the possibility

to show or hide apps for end-users as shown in 4.3.

Change default page view for users

While in admin mode, do the necessary page adjustments – you can change background

texture, hide/unhide/sort apps by using same icons as in user mode (see 4.3)

Once all necessary changes are done, click on Save icon

to save the default page.

Add / remove apps

Click on plus icon

to enter the administration window of apps. If you see the following

window, make sure you have set correct IP/gateway/DNS settings for your LogicMachine
(

System config



Network



Interfaces

)

Summary of Contents for LM5p-GSM




































































































































































































































































































Search results

Summary of Contents for LM5p-GSM

Reviews:

Brands by name

Popular brands

Embedded Systems LM5p-GSM, Product Manual

Search results

Summary of Contents for LM5p-GSM

Reviews:

Brands by name

Popular brands