Embedded Systems LM5p-GSM, Product Manual

Page: 226 / 291

226
dalicmd('internal', 'arc', { addrtype = 'broadcast', value = 42 })
Setting DTR
For commands where DTR is needed prior to executing command, use setdtr command to set
the value:
-- set dtr for ballast 5 to 200
dalicmd('internal', 'setdtr', { addrtype = 'short', address = 5, value = 200 })
Example
Change address of DALI ballast with current address 5. 1byte object need to be added, event-
based script looks as follows:
value = event.getvalue()
value=value*2+1
require('user.dali')
dalicmd('internal', 'setdtr', { addrtype = 'short', address = 5, value = value })
dalicmd('internal', 'storeshortaddress', { addrtype = 'short', address = 5})
Example
(use gateway with id 1, switch all ballasts off, set ballast with short address 5 to full
on)
require('user.dali')
dalicmd(1, 'arc', { addrtype = 'broadcast', value = 0 })
dalicmd(1, 'arc', { addrtype = 'short', address = 5, value = 254 })
Example (set maximum value for ballast 5 to value 200; the ballast is connected on internal
DALi gateway on LogicMachine )
require('user.dali')
dalicmd('internal', 'setdtr', { addrtype = 'short', address = 5, value = 200 })
dalicmd('internal', 'storemax', { addrtype = 'short', address = 5 })
Example (log all ballast short addresses which are connected to internal DALI gateway)