mPanel v1 User Manual
Page
9
mPanel Installation and Configuration
Mount Location Planning and Preparation
¾
IMPORTANT:
Make sure that you are satisfied with the location before making a cut out in
your wall.
¾
Select a location that is close to an Ethernet connection. This Ethernet connection will be
used to connect to your local area network (LAN). The LAN will provide data information
for the Digital Control Interface (mControl) and Digital Media Interface (Music). Optionally,
your Ethernet cable will be used for power, if you will be powering the mPanel using PoE.
¾
If you are not using PoE, select a location that is close to a power outlet, so that you can
connect the mPanel power adapter.
¾
Select a height that provides optimum viewing and touch operation.
¾
To plan for mPanel wall mounting, use the following diagram, which shows the area
required in the wall with the front panel installed.
Thi
c
kn
ess on
the wall
0.3”
9.0”
6.5”
7.0”
