www.emaxmodel.com
SKYLINE32
5
Motor Connection
Figures below show motor position and rotation:
In the above figure, the front of red arrow points to the head of the multirotor. The arrows in the small circles point
to the direction of motor rotation. Motor numbers are marked inside the circles and S1 stands for servo. Purple
motors are top, and blue circle are bottom.
Note: Configurations with more than 6 motors require CPPM receiver.
Aircraft assembly
Please install flight controller and ESC on your aircraft. Please refer to the instructions above for proper connection
of the SKYLINE32 to the ESC’s and receiver. Anti shock, anti-vibration mounting is recommended, preferably with
soft double-sided adhesive to increase the damping effect. Avoid vibration of gyro, to increase flight stability.
Parameter Adjustment Installation
1.Program driver installation:
Please install the driver program to your computer if you do not have it already.
（1）
Please choose the compatible driver for your computer, link
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx
(2) Install the driver program on your computer.
（3）
Please switch the ESC switch to ON
（4）
Connect flight controller to computer with Micro USB cable
（5）
Follow steps to install the driver.
2. Install Configuration Software
（1）
Please install Google chrome web browser.
（2）
Open Google Chrome web browser, go to "Chrome Web Store" and search BaseFlight - Configurator.
（
3
）
Add " BaseFlight - Configurator" App.
