6
Nighthawk Pro 200
yinyanmodel.com
Required Tools and Equipment
1. Computer or Laptop
2. Monitor with Video Receiver and/or Goggles.
3. Radio Transmitter (PNP MODEL ONLY)
4. 1.5MM, 2.0MM, 2.5MM hex driver, tweezers, needle nose pliers, scissors.
5. LiPo Battery with XT60 connector (Suggested battery size: 85*40*60mm
，
3S-4S)
Installation Steps
Step 1: Preparation
Remove the Nighthawk Pro 200 from the package and place it on a leveled, horizontal place (like a table). Using a
Micro USB cable, connect the Nighthawk Pro 200 to the Computer.
Step 2: Driver and Configuration Software Installation
1.
Driver Installation
Please install the Driver to your computer. If you already have the proper Driver installed, continue on to Step 2.
（1）
Please choose the compatible driver for your computer. Link to Driver:
http://url.cn/7SnpKh
（2）
Install the Driver onto your computer following the installation windows.
（3）
Connect the flight controller to the computer using a Micro USB cable.
（4）
Follow steps to complete installing the driver
2. Configuration Software Installation
（
1
）
Please install Google Chrome Web Browser.
（
2
）
Open Google Chrome Web Browser and go to "Chrome Web Store" and search for “Betaflight - Configurator.”
（
3
）
Add " Betaflight - Configurator" App.
Note: Follow the same procedure described above to install Cleanflight - or Baseflight - Configurators.
Step 3: How to use Betaflight - Configurator
Only “Betaflight - Configurator” will be discussed below. If customers use Baseflight or Cleanflight firmwares, please
download Baseflight or Cleanflight - Configurator to configure your controller.
