EMAR Case 30 Series, Installation Manual

Page: 29 / 50

29
Fit top hat & spring assembly
Top hat
Item 25
Spring
assembly
Item 6
Connect rear curtain and top hat with spring
assembly.
Cut the chain to adjust tension as needed. The
spring should have slight tension on it to create a
good seal between the top hat and rubber curtain.
15/08/2019 ECD-DOC-CA0230
Warning:
Before moving the spreader back to gain access to
the inside of the machine the chain carabiner will
need to be unhooked to avoid over-tensioning the
spring. Remember to reattach after putting back
into working position.