eMagin Corporation
SXGA120-120 Reference Board
D01-500947-07 Rev A
SXGA120120 Design Reference Board User
’
s Manual
2
SXGA120 Design Reference Board.
The SXGA120 Design Reference Board Rev. 5 is shown in figure 3-1 below. The
major components are labeled for easier identification. The minimum requirements
for displaying video on the SXGA120 Design Reference Board are; a +9 Volt power
supply connected to the power connector, a digital video source connected to the
HDMI connector (A DVI to HDMI adapter is included with the unit) and an
SXGA120 OLED connected to the display connector (J12).
The SXGA120 Design Reference Board also supports eMagin Corporation’s VGA
microdisplay. However to do so requires a different on-board firmware and FPGA
configuration, and the board can only support one configuration at a time. Please
contact eMagin Corporation’s Customer Service if you wish to change the DRK
board to support the eMagin’s VGA microdisplays.
As delivered with the SXGA120 Design Reference Kit, the board is configured to
support SXGA120 displays only.
Figure 3-1 SXGA120 Design Reference Board Rev. 5
RS232
POWER
HDMI
DISPLAY
HDMI
FPGA
PIC
