eMagin Corporation
SVGA+ DRK User Manual
D01-500948-01 Rev A
Revision A
Interface & Design Reference Kit User
’
s Manual
7
Figure 6-1 Interface & Design Reference Kit Software Utility
6.
The application communicates with the PIC on the Interface & Design Reference Kit and
reads the initial status of the “Brightness,” “Vcathode,” and “OLED Registers” outputs.
7.
The read/write buttons shown in the “OLED Registers” panel will read/write the register
settings in their corresponding boxes from/to the OLED microdisplay.
8.
The read/write buttons displayed in the EEProm panel will read/write the settings displayed in
the register boxes from/to the Interface & Design Reference Kit’s EEProm. This will allow
you to save custom settings you wish to upload to the microdisplay when its power is cycled.
Direct control of the Interface & Design Reference Kit can also be implemented into a customer
specific application using the following hardware protocol and command set.
6.1.1. Hardware Protocol
•
bit, no parity
•
9600 baud
•
No hardware handshake
