background image

DUV1000 User’s Guide 

   

14 

 

6.2  Calling Card Parameters 

The following information is required for DUV1000 to make and receive Internet phone calls. The 
user will get this information from the VoIP (Internet Telephone) service provider. Please note that 
DUV1000 will not work before configuring this information. 
 

Calling Card User ID 

This is the Internet phone number or user ID assigned to you. It can have a maximum of 30 
characters. This information is required to verify the calling card user identity to the VoIP (Internet 
Telephone) Service Provider.  
 

Calling Card Password  

This information is required to verify the calling card user identity to the VoIP (Internet Telephone) 
Service Provider. It can have a maximum of 30 characters.  
 

6.3 Review 

Configuration 

This option plays current information for all parameters in main menu as 
 

“ISP Phone number is xxxx,  
ISP User name is xxxx, 
ISP Password is xxxx, 
Calling Card user ID is xxxx, 
Calling Card password is xxxx” 

 

After playing this message, it prompts with the main menu. 
 

6.4 Save 

and 

Exit 

This option saves all the information entered in the configuration and exits from configuration 
option. You can leave the configuration without saving the information by replacing the handset or 
switching the speaker off. 
 

6.5 Extended 

Menu 

6.5.1 Configuration 

Password 

Internet access and calling card parameters are valuable information and it can be misused. 
Thus, DUV1000 has password protection to enter the configuration module. It can have maximum 
of 30 characters. Default is “12345”. The user is advised to change this value. If you forget this 
password, reset the phone to factory values and configure the phone again. 
 

6.5.2  Software server address  

This is the IP address of software server from where the latest DUV1000 software can be 
downloaded. It can be a valid IP address like 198.62.73.101 or a valid domain name like 
DUV1000.cityonlines.com. The domain name can have maximum of 30 characters, including 
‘dots’. Default server address is duv.pc2phone.com . 
 

6.5.3  Country Code  

Following is a list of countries supported with their respective codes 
 

 

Summary of Contents for DUV1000

























Reviews: