1
2
3
4
5
4
GB
Thank you for choosing the EM2GO electric vehicle
charging station.
With this unit you have chosen a high-precision charger equipped with many safety-relevant
protective devices, which guarantees an all-round carefree charging of your vehicle.
Important Note:
Please read these important safety instructions for charging your vehicle.
Please keep this user manual. The charger has many safety functions. Read all safety
information and warnings in this manual to become aware of possible dangers.
Warning
Basic precautions should always be followed when using electrical products.
This manual contains important instructions, including the following, which are required and
must be followed during installation, operation and maintenance.
• Do not install or use the charger near explosive, caustic or flammable materials,
chemicals or vapours.
• Switch off the input power of the charger before installing or servicing the charger.
• The device is only designed for vehicles that are compatible with the IEC 62196 charging
standard.
• Do not use the charger if it is cracked, frayed, broken or damaged
• Do not try to open, disassemble, repair, manipulate or modify the device
If you have any questions or repairs, please contact our customer service.
• Do not use the charger when you are in the vehicle or when exposed to heavy rain,
snow or severe weather.
• Be careful when transporting the charger.
• Do not touch the charging connector with sharp metal objects
• Do not pull the charging cable with force or with sharp objects
Warning
The device must be installed, adjusted and serviced by qualified electricians or
people who are familiar with the construction and operation of this type of EV-Charger
Failure to follow this precaution could result in death or serious injury.
• Incorrect installation and testing of the charger can lead to damage
No liability is assumed for the resulting damage.
• Make sure that the charging cable is well positioned during the charging process cannot be
walked on, damaged or burdened.
• Check the wire diameter according to the local electrical requirements
• Switch off the corresponding power supply before starting the installation.
Technical data:
• Operating voltage: 400V AC ±10%, 50-60 Hz
• Operating current: 16 amps
• Max. Output power: Typically 11 kW
• Housing: IP66, splash water protected
• Operating temperature: -25 to + 55 °C
• Display: Colour LCD, LED-stripes
• Protection against: over and under voltage, overload protection, short circuit protection,
over temperature protection, lightning protection, fault current (RCD A + 6mA DC).
• Connection: Type 2 plug (CT) | Type 2 socket (ST)
• Cable length: 7.5 meters (CT)
• Structure: CE standards EN61851-1: 2011, EN61851-22:2002
• Dimensions: 65 x 195 x 295 mm
• Weight: 7 Kg
Important Note:
According to §19 NAV of March 21, 2019, the operation of charging devices for electric
vehicles must be reported to the responsible electricity provider before use (from 11 KW)
and before installation (from 22 KW).
This can also be done by the commissioned electrician.
Please contact your electricity provider by phone or online
for more information.
Assembly
To install the charging station, follow the
installation instructions on pages 5 and 6
of this manual.
Overview
1.
CEE plug with 1.5 meter connection cable suitable
for 380V AC three-phase current pre-configured
2.
Colour display
3.
On / off switch
4.
LED strip
5.
EV charger plug (CT) | Type 2 Socket (ST)
