EM Test
CWS500 N2
User manual
V 3.00
9 / 38
Fig 3.3
1
Connection Ext. Amplifier RETURN
2
Pre coupler insert loop
3
SG out
4
Power On Switch
5
Power selector 115V
– 230V
6
USB Interface
7
IEEE Interface
8
Remote Control Connector
9
Fail 1 Detection "Stop"
10
Fail 2 Detection "Pause"
11
Pre Amp Insert Loop
10 Fail Detection FAIL 2
The BNC input FAIL 2 can be used for failure detection on the EUT. If the input is set to ground (chassis),
the failure will be detected and the test continues normally. After a FAIL 2 events the test routine will stop
and the message ”FAIL 2“ will appear in the host screen ( icd.control software).
11 Pre Amp Insert Loop
Output and return connection for the external device like an external Amplifier.
