14
15
Dynamic Bass
Located in the EQ menu, the “Bass” slider
is a very effective way to increase bass per-
formance without overloading the speakers.
Level at “0” = no Dynamic Bass function
active.
Level at “1” to “20” = the higher the value
the higher the bass increasing. Simulta-
neously a strong subsonic filter is enabled
to protect the speakers from deepest bass
frequencies to avoid damage to them.
Gain
Gain Phase
In this menu you can make the following
settings for each individual channel: sound
level, phase and mute.
When you have done the preferences,
go back to the main menu, and touch the
"Save to Amp" button
to transfer the
preferences to the amplifier. During the sav-
ing process do not switch off the amplifier
as this may lead to malfunction and/or dam-
age. You can also save the preferences on
your smartphone. To do this, press "Save
on Phone"
, and enter the desired
filename.
Save to Phone
You can save the settings on your smartphone. To do this, press "Save on Phone"
,
enter the desired filename, and confirm with "OK".
Load
Shows a list of files saved on the smartphone. Touch the desired setup to load. If you now
want to save the loaded setup permanently on the amp, press "Save to Amplifier"
.
Save to Amp
When you have done the settings, touch the "Save to Amplifier" button
and chose
the favorite to transfer the settings to the amplifier. During the saving process do not
switch off the amplifier as this may lead to malfunction and/or damage.
