IN 2
IN 1
IN 1
OUT 1
OUT 1
IN 2
OUT 2
OUT 2
Power
- 16 Volt
+ 16 Volt
elysia GmbH | Am Panneschopp 18 | 41334 Nettetal | Germany
18V/1A DC
Attention!
There may be 48V!
6
Connectors (elysia qube)
Audio inputs
(XLR and ¼” phone jack)
Audio outputs
(XLR and ¼” phone jack)
Power switch
Mono operation:
Connect either input and output
1
or
2
- both will work
identically.
Stereo operation:
Connect both inputs and outputs
1
and
2
- the choice
which channel is left and which is right is up to you.
Inputs (+4 dBu)
XLR balanced:
Pin 1:
ground
Pin 2:
hot (+)
Pin 3:
cold (-)
XLR unbalanced:
Pin 1:
ground
Pin 2:
hot (+)
Pin 3:
ground
Jack balanced:
Sleeve:
ground
Tip:
hot (+)
Ring:
cold (-)
Jack unbalanced:
Sleeve:
ground
Tip:
hot (+)
Ring:
ground
Outputs (+4 dBu)
XLR balanced:
Pin 1:
ground
Pin 2:
hot (+)
Pin 3:
ground
XLR unbalanced:
Pin 1:
ground
Pin 2:
hot (+)
Pin 3:
idle
Jack balanced:
Sleeve:
ground
Tip:
hot (+)
Ring:
ground
Jack unbalanced:
Sleeve:
ground
Tip:
hot (+)
Ring:
idle
Please note that in stereo operation
both channels are always processed by
one single control voltage generated
from a mix of both signals. This means
you should only compress adequate
stereo material like sum signals in this
mode - dissimilar signals like a bass
drum in one channel and a synth pad in
the other will not give you the intended
‘dual mono’ results.
