8
• The ion exchange resin must not enter the heating system. Do
not remove the fine mesh filter in the output.
• Observe the maximum system fill pressure.
5.1.2. Simple permanent connection
5.1.3. Permanent connection in combination with automatic topping up
Safety instructions
When directly connecting to the
water mains, the water utilities'
regulations must stringently be
observed (e.g. system separation to
DIN EN 1717).
Close all taps and valves on
the heating and drinking water
networks after use.
Safety instructions
If permanent topping
up is to be provided, the
installation must have the
necessary safety devices
such as system separation,
pressure monitoring and leak
protection.
Install the PUROTAP®
compenso upstream of the
topping up monitor.
Keep valves closed when
not in use
Raw water →
Raw water →
Automatic topping
up monitor
Backflow
preventer