Ill. PEERINCi
Launch the synchronization ebetween your skate and your remote as you do usually (long
push on the power buttons of the board and the remote)
Choose your options
1. ENGINE CONFIGURATION
2WD (one/two engine wheels) or 4WD (4 engine wheels)
Choose "2w
□•
then press once on the Power button to confirm.
2. SPEED DISPLAY:
MPH (miles per hour) or KM/H (kilometers per hour)
Select your choice then press once on the Power button to confirm.
3. ENGINE TYPE :
HUB (hub engine) or BELT (belt engine):
Choose "Hue• then press once on the Power button to confirm.
4. WHEEL DIAMETER
Select the diameter of your wheel in the list using the scroll wheel. The original wheels of
the Powerkit are 90mm {83mm for the 2019 model). If you are using other wheels on your
electric skate, choose the diameter accordingly then press once on the Power button to
confirm.
5. BRAKE LEVEL :
Select "100%• then press once on the Power button to confirm.
Your remote is set up !
IV. CHANCiE DIRECTIONS (FORWARD/BACKWARD)
To change the direction from forward to backward or reverse, push twice (quick push) on
the Mode button.
Please note : your electric skateboard has to be motionless for this to work. lt can not be
done while moving.
V. DISTANCES
The distance of the trip stops when you turn off your skate.
The total distance is displaying the total miles/kilometers made by your skate controller
since its conception.