9
Entry, deletion and modification of one or more users.
- Registration of new keys. Modification of associated parameters (priority and activation settings).
- Storage of data and recovery on specific files on the PC.
- Associations with keys of the names of persons using them (the data is stored on the PC and not on the control unit).
- Safety: in the event of damage to the switchboard, data can be restored at any moment with no waste of time.
- Possibility of repeating the same programming for multiple control units without having to re-enter the data-base.
- Reading of data by switchboard with recovery also of data entered manually.
- Possibility of entering additional information as a description (notes) [to be completed]
- Registration, modification and deletion of key list “from keypad”.
CONNECTION OF PC FOR DATA DOWNLOAD/UPLOAD:
This is performed by means of the specific interface (type 6952) connected to the COM port of the PC as shown in the example
below (NB: in this case the panel is type 8017).
made in ITALY
R
CN4
PROGRAM
T2
4
T3
T4
T1
S4
S3
S2
RB
RA
1
4
5
Art. 8017
RESET
Art.
6952
Interfaccia seriale
serial interface
made in ITALY
R
The connection between the PC and device is by means of the interface connected with just wires as described above.
APPENDIX A: “KEY TO DIGIBUS CODES“
The following lists the main useful codes. If associated with the touchkeys and sent to activate external devices (by means of
170D or 170F) use codes that do not interfere with operation (normally codes F1…F8). Note that if different commands are sent
undesired operating modes may occur.
N.B.
Avoid other digital
objects in parallel on this
connection.
GND
RX Led lit if con-
nection ok
Art. 8017