Elvox 55IP/360, Installation And Operation Manual

Page: 6 / 12

6
EN
The Quick Guide is for quick installing and connecting the Fisheye IP Camera. For details, please refer to the IP Camera’s User
Manual.
Camera’s Connectors
N. Connector N. pin Definition Remarks
1 Power 12 VCC
1 Power
Power connection
2 Reserved
3 GND
24 VCA
1 Power-1
2 GND
3 Power-2
2 RJ-45 - 10/100 Mbps Ethernet/ PoE
3 Alarm & Audio I/O - Alarm & Audio I/O Contact us to purchase the
cable
4 Reset Button
-
Restore to default setting; press the button with a proper tool
5 Micro SD Card Slot
-
For video recording storage
IP Camera Installation
Please follow the instructions below to complete IP Camera installation.
Power up the Camera
To power up the IP Camera, please plug the camera’s DC 12V/ AC 24V cable into the power terminal block.
Alternatively, connect the Ethernet cable to the camera’s RJ-45 port and plug the other end of the cable into a PoE switch
.
NOTE: If using PoE, make sure Power Sourcing Equipment (PSE) is in use in the network.
Ethernet Cable Connection
Connect one end of the CAT5 Ethernet cable to the RJ-45 connector of the IP Camera, and the other end of the cable to the
network switch or PC.