12
EN
CCTV
Rear Panel Instruction for 16-CH
1
Grounding
8
Connect USB mouse or connect external USB devices
2
Connect to speed dome or keyboard
9
Power supply
3
1-ch relay output. Connect to external alarm
10
4 CH Audio input
4
Connect to external sensor 1-16
11
Video input channels from 1-16
5
Connect to high-definition display device
12
Audio output, connect to the sound box
6
VGA output, connect to monitor
13
Video output
7
Network port
14
Connect to monitor as an AUX output channel by channel.
Video would be displayed without OSD.
3. Startup & Shutdown
3.1 Startup
Step 1: Connect to cameras and monitor.
Step 2: Connect with the source power.
Step 3: The device will boot and the power indicator will display blue.
Step 4: A WIZZARD window will pop up.
3.2 Shutdown
You can shut down the device by using IR remote controller and mouse.
By IR remote controller:
Step 1: Press Power button. This will bring up a shutdown window. The unit will shut down by clicking “OK” button.
Step 2: Disconnect the power.
By mouse:
Step 1: Enter into
Menu and select “Shut Down” icon. This will take you to a shutdown window.
Step 2: Click OK. Then the unit will power off after a while.
Step 3: Disconnect the power
4. Setup
Wizard
z
After the device starts, a setup wizard pops up. You can set up time
，
network , record and disk management.
Summary of Contents for 46840.D16
Page 20: ......
