Cleaning and maintenance
25
© 2021, Elon Group AB. All rights reserved.
Clean the base filter
Do this after every fifth drying cycle.
1.
Open the cover.
2.
Unlock the 2 locking levers.
3.
Grip the filter handle and remove the filter.
4.
Clean the filter. If needed, rinse the filter in water and dry it thoroughly afterwards.
5.
Clean the rubber sealing.
6.
Install the filter.
7.
Lock the 2 locking levers.
8.
Close the cover until you hear a click.
Clean the heat exchanger
To be performed when necessary, usually once every 6 months.
NOTE!
Clean the heat exchanger regularly to maintain shorter drying times and a lower energy consumption.
