8
Safety
© 2021, Elon Group AB. All rights reserved.
WARNING!
Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances
burning other fuels, including open fires.
WARNING!
•
Remove all packaging and transport bolts before using the product. Otherwise, serious damage may
result.
•
Keep all packaging material well away from children. There is a risk of suffocation!
WARNING!
•
Make sure that the product is connected to water and electrical supplies by a suitably qualified person in
accordance with the manufacturer’s instructions and local safety regulations.
•
If the power cord is damaged, it must be replaced by the manufacturer, the manufacturer’s service agent
or similarly qualified persons in order to avoid a hazard.
•
Make sure to connect the power plug to an earthed three-pole socket. Check carefully to ensure that your
socket is properly and reliably earthed.
•
Make sure that the power plug of the machine is accessible after installation and that the machine does
not stand on the power cord.
•
Make sure the power plug is not trapped by the machine, it can get damaged.
•
When levelling the machine, the lock nuts on all four feet must be screwed tightly against the housing.
•
If applicable, make sure the ventilation openings in the base of the product not are obstructed by, for
example, a carpet.
•
Use the new hose sets supplied with the product. Do not reuse old hose sets.
•
In case of water leakage or water splashes let the appliance dry in the open air.
WARNING!
•
Do not use multiple plugs or extension cords.
•
The appliance must not have an external switching device such as a timer or connected to a circuit that is
regularly switched on and off.
•
Do not pull the plug out of the mains outlet if there is flammable gas around.
•
Never pull out power plug with wet hands.
•
Always pull at the plug, not at the cable.
CAUTION!
•
Do not install the machine on a carpet floor. The obstruction of the openings by a carpet can damage the
machine.
•
Keep the appliance clear from heating sources and direct sunlight to avoid plastic and rubber parts to
corrode.
•
Do not put any excessively heavy objects on the appliance.
CAUTION!
•
The inlet hose must be connected to the cold water supply.
•
Do not kink, crush, modify or sever the water inlet hose.
•
Do not kink or stretch the drain hose.
•
Position the drain hose properly, as it could lead to a water leak if it is damaged.
•
If the drain hose is too long, do not force it into the machine as it will cause unusual noises.
•
Mains plug must be accessible after installation.
CAUTION!
•
Before the product is used the first time, it must be calibrated.
•
Before washing laundry items the first time, a washing programme must be run to completion without any
items in the drum.
