GB
42
Important during
installation!
• Do not place the appliance in direct
sunlight.
• The appliance is heavy. Take care
when you are moving it.
• When plugging in the appliance,
carefully follow the instructions in
this user manual.
• Unpack the appliance and check
that there is no damage to it. Do
not plug in the appliance if it is
damaged. Report any damage
to the retailer immediately. Keep
the packaging material in case of
damage.
• It is recommended that you wait
at least four hours before plugging
in the appliance, to allow the
refrigerant to run back into the
compressor.
• Make sure there is adequate air
circulation around the appliance,
otherwise it may overheat. Follow
the installation instructions to
ensure adequate ventilation.
• If possible the appliance should
not be installed with its back too
close the wall, to prevent contact
with hot components (compressor,
condenser). Follow the installation
instructions to avoid the risk of fire.
• Do not place the appliance close to
a radiator or oven.
• Make sure the plug is accessible
after the appliance has been
installed.
Servicing
Any electrical work that is required
during servicing must be carried out
by a qualified electrician or competent
person. This product should only be
repaired at an authorized service
centre, using genuine spare parts.
