30
© 2022, Elon Group AB. All rights reserved.
Check that all accessories are complete and the unit is not
damaged. Pour water into the water tank up to the max level and
brew water several times without ground coffee, then discard the
water. Clean all detachable parts thoroughly with warm water.
1. Open the water tank lid and fill the water tank with cold drinking
water. The water level should not exceed the MAX level as
indicated on the water gauge.
2. Place the funnel into the funnel support and make sure the funnel
is fitted correctly, then place the filter paper, or the supplied nylon
filter, in the funnel.
3. Add ground coffee powder into the filter paper or the nylon filter.
Usually a cup of coffee requires a level tablespoon of ground
coffee, but you may adjust according to personal taste.
4. Place the stainless steel jug on the warm plate so that it is level.
5. Plug the power cord into the outlet. The LCD will display “12:00”
and the colon will flash, but only some of the buttons will light up.
6. Press the ON/OFF button, the red RUN indicator will light up. The
appliance will begin working.
7. The brewing process can be interrupted by pressing the ON/
OFF button once at any time, the red RUN indicator will be
extinguished. The appliance will continue brewing when ON/OFF
is pressed again.
8. Note: You can take out the jug, pour and serve at any time. The
appliance will stop dripping automatically. But the time cannot
exceed 30 seconds.
9. Remove the jug to serve when brewing is finished (about one
minute after the coffee stops dripping out).
BEFORE FIRST USE
MAKING DRIP COFFEE
