25
CIM3703X
GB
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The water indicator
is on.
Not enough water in the
appliance .
Switch off the ice maker, top
up with water and start the
appliance by pressing the On/
Off button .
The ice indicator
is on.
The ice box is full .
Remove the ice cubes from the
ice box . Press the Select button
for five seconds (the ice maker
will run 10 cycles and the ice
indicator is on) .
The ice cubes stick
together.
The ice cycle is too long .
Switch off the ice maker and
wait until the block of ice has
melted before restarting it . Se-
lect the smaller ice cube size .
The water temperature
inside the internal tank is
too low .
Change the water . Recom-
mended water temperature:
8–32 °C
The ice cycle is nor-
mal but no ice cubes
are forming.
The room temperature
or the water temperature
inside the internal tank is
too high .
The room temperature must be
5–40 °C and the water tempera-
ture 8–32 °C .
Refrigerant is leaking
from the refrigeration
system .
Contact an authorised techni-
cian .
The pipe of the refrigera-
tion system is blocked .
Contact an authorised techni-
cian .
