Troubleshooting
25
© 2021, Elon Group AB. All rights reserved.
1.
Remove the oven door from the appliance.
2.
Lift the supports a little and pull them off the glass.
3.
Lift up the lower end of the glass pane and remove it.
4.
Turn the rubber holders a little and pull them off from the remaining glass pane.
5.
Lift up the upper end of the remaining glass pane and remove it.
Install in the reverse order.
NOTE!
The markings (semicircle) on the door and the glass pane should overlap.
Remove and install the wire guides
Use this procedure to remove and install the wire guides.
1.
Pull the bottom side of the guides out from the oven wall.
2.
Pull out the guides from the holes at the upper side.
Install the guides in the reverse order.
