elvita CDM2601V, User Manual

Page: 76 / 142

GB
76
Display
8 Warning
indicator
Rinse aid
If the “ ” indicator is lit, it means the dishwasher is low
on dishwasher rinse aid and requires a refill.
Salt
If the “ ” indicator is lit, it means the dishwasher is low on
dishwasher salt and needs to be refilled.
9 Program
indicator
Intensive
For dishes with stubborn food deposits, and normally dirty
pots, pans, dishes etc. with dried-on food.
ECO
This is the standard program suitable for normally dirty lo-
ads, such as pots, plates, glasses and lightly soiled pans.
Rapid
A shorter wash for lightly soiled loads that do not need
drying.
90 min
For normally dirty loads that need a quick wash.
10 Delay time
To show the delay time. (3h/6h/9h)
Water softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water that would have an adverse effect on the opera -
tion of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area.
Your local water authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to let you adjust the amount of salt consumed based on the hardness of the water used. This is
intended to optimize and customize the level of salt consumption.
1. Switch on the appliance;
2. Press the Start/Pause button for more than 5 seconds to start the water softener setting program within 60 seconds
after the appliance was switched on;
3. Press the Start/Pause button to choose the setting that matches the water quality in your area. The settings will change
in the following sequence: H1->H2->H3->H4->H5->H6;
4. Press the Power button to exit the setting program.
WATER HARDNESS
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
German
°dH
French
°fH
British
°Clarke
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
mmol/
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
Water softener level
H1 -> Rapid light bright
H2 -> 90 min light bright
H3 -> Rapid, 90 min light bright
H4 -> Glass light bright
H5 -> Rapid, Glass light bright
H6 -> 90 min, Glass light bright
Salt
consumption
(grams/cycle)
0
9
12
20
30
60
1° dH = 1.25° Clarke =1.78° fH = 0.178 mmol/l
Default setting: H3
Contact your local water supplier for information on the hardness of your water supply.