elvita CDM2601V, User Manual

Page: 69 / 142

GB
69
Troubleshooting tips
Check level
front to back
Check level
side to side
NOTE :
The maximum adjustment height of the feet is 50 mm.
Before calling for service
Reading through the tips on the following pages may save you from calling for service.
Problem Possible cause What to do
Dishwasher doesn’t
start
Fuse blown, or circuit
breaker has tripped.
Replace fuse or reset circuit breaker.
Disconnect any other appliances sharing the same circuit with the dishwasher.
Power is not turned on.
Make sure the dishwasher is turned on and the door is closed securely.
Make sure the power cord is properly plugged into the wall socket.
Water pressure is low. Check that the water supply is connected properly and the water is turned on.
Door of dishwasher not
properly closed.
Close the door properly and latch it.
Water is not pumped
out of dishwasher
Twisted or trapped drain
hose.
Check the drain hose.
Filter clogged. Check the coarse filter.
Kitchen sink clogged.
Check the kitchen sink to make sure it is draining well. If the problem is due to a
blocked kitchen sink, you may need to call a plumber rather than a dishwasher service
technician.
NOTE
!
Check that all transit bolts have been removed and that the spray arms can move
freely. Complete installation by running a program of your choice.