75
© 2021, Elon Group AB. All rights reserved.
Display
8 Warning
indicator
Rinse aid
If the “ ” indicator is lit, it means the dishwasher is low on
dishwasher rinse aid and requires a refill.
Salt
If the “ ” indicator is lit, it means the dishwasher is low on
dishwasher salt and needs to be refilled.
9 Program
indicator
Intensive
For dishes with stubborn food deposits, and normally dirty
pots, pans, dishes etc. with dried-on food.
ECO
This is the standard program suitable for normally dirty
loads, such as pots, plates, glasses and lightly soiled pans.
Rapid
A shorter wash for lightly soiled loads that do not need
drying.
90 min
For normally dirty loads that need a quick wash.
10 Delay time
To show the delay time. (3h/6h/9h)
Water softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water that would have an adverse effect on the operation of
the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area.
Your local water authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to let you adjust the amount of salt consumed based on the hardness of the water used. This is inten-
ded to optimize and customize the level of salt consumption.
1. Switch on the appliance;
2. Press the Start/Pause button for more than 5 seconds to start the water softener setting program within 60 seconds after the
appliance was switched on;
3. Press the Start/Pause button to choose the setting that matches the water quality in your area. The settings will change in the
following sequence: H1->H2->H3->H4->H5->H6;
4. Press the Power button to exit the setting program.
WATER HARDNESS
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
German
°dH
French
°fH
British
°Clarke
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
mmol/
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
Water softener level
H1 Rapid light bright ->
H2 90 min light bright ->
H3 Rapid, 90 min light bright ->
H4 ECO light bright ->
H5 ECO, Rapid light bright ->
H6 ECO, 90 min light bright ->
Salt consumption
(grams/cycle)
0
9
12
20
30
60
1° dH = 1.25° Clarke =1.78° fH = 0.178 mmol/l
Default setting: H3
Contact your local water supplier for information on the hardness of your water supply.
