Installation
29
© 2021, Elon Group AB. All rights reserved.
1.
Remove the clamp protection cover.
2.
Open the terminal board cover.
3.
Install the bridge.
4.
Secure the cable wires to the terminal board using the screws.
WARNING! Make sure the protective earth wire is properly secured.
5.
Secure the cable with the clip.
6.
Close the terminal board cover.
7.
Install the clamp protection cover.
Do the following after the connection is completed
1.
Make sure the mains power has been correctly installed.
2.
Check that the heaters, control and governing elements are working correctly.
