90
© 2021, Elon Group AB. All rights reserved.
ERROR CODES FOR SENSOR DRYER
Error code
Cause
Er 1
Error 1
Regulator sensor. Error in heating element sensor.
Error due to failure or short-circuit in sensor.
Reset by turning power off/on.
Er 2
Error 2
Outlet sensor. Error in outlet duct sensor.
Fault is same as Error 1.
Reset by turning power off/on.
Er 3
Error 3
Drying cycle has exceeded maximum time for drying program.
Cause: No signal received from outlet sensor to indicate that laundry is
dry.
Reset by holding down Start/Stop button for 5 seconds.