Elvid USB-FC-110 Lynx, User Manual, Page: 19 / 28

Video Mode
Begin by switching both the Lynx and the camera to video
mode. Long-press the [ ] button to enter Live View. The
names of buttons below refer to the blue-colored labels
to the right of the buttons, which are used for the Video
mode.
Programming Focus Points
1. Turn the focusing wheel to set the focus at the
desired focusing area that is the greatest distance
from the camera. Long press the
Far Stop button
until the green light blinks once—this indicates that
this focus area has been saved by the Lynx.
2. Turn the focusing wheel to set the focus at the
desired focusing area that is closest to the camera.
Long press the
Near Stop button until the green
light blinks once, indicating that this focus area has
been saved.
3. You can set two more focus areas, if you wish,
between the Far and the Near points. Set a focus
area anywhere between the Far and Near focus
areas in the same way, using one of the buttons
labeled "
Focus Pt " in blue type. Set another focus
area between the Far and Near focus areas, using
the other button labeled "
Focus Pt " in blue type.
19