Elvid USB-FC-110 Lynx, User Manual, Page: 15 / 28

Focus command send rate is one of the most important
settings on the Lynx Focus Controller. It determines
how quickly focus is adjusted and allows accurate and
repeatable saved focus points.
1. When the Lynx is in Still
or Video Mode, long-press
the
focus command send
rate button while rotating
the wheel to adjust the
focus command send
rate. The LCD will display
numbers from "1" to "9".
2. The Lynx works best
when the focus command
send rate is between "4"
and "7".
3. The focus command send
rate is saved automatically,
so you don't need to reset
it each time you turn the
Lynx on.
Note: Do not change the
focus command send rate
after focus points have
been saved—you will lose
focus point accuracy.
FOCUS COMMAND
SEND RATE
15