12
Composite Video Input
: To use your FieldVision 4K as a wired
standard-definition video monitor, an A/V breakout cable
(available separately) is needed.
1. Insert the 1/8
″
(3.5 mm) plug into the A/V input on the
side of the monitor.
2. Connect your composite video source to the yellow
RCA jack.
3. If desired, connect your audio source to the white (L) and
red (R) audio jacks.
4. Press the Mode button to cycle through the input modes
until Video appears on the monitor. If your composite
video source is sending a signal to the monitor, the image
will appear onscreen, and the power indicator LED will
glow green.
Note: When using the composite video input, your audio
source must be plugged into the FieldVision
4
K’s composite
audio input in order to monitor the sound.
If your video source is connected, the picture will appear on the
screen, and the status LED will glow green. If your video source
is not connected, a blue screen will display a no-signal message.
To turn the screen off, press the power button. The screen will
go black, and the status LED will glow red to indicate that the
power is on and the screen is in sleep mode.