10
To turn on the FieldVision 4K, press the power button on the
front panel of the monitor. The FieldVision 4K will turn on
and enter standby mode, and the status LED will glow red.
To remove the battery, press and hold the battery release
button, and slide the battery out of the plate.
Charge the included battery by placing it on the battery
charger and gently clicking the battery into place. Plug the
charger into an outlet. The status LED will glow red while
the battery charges, and will turn green once the charging
is complete.
AC POWER
To run the FieldVision 4K with AC power, use a 12 V DC
adapter to connect the FieldVision 4K’s DC power input to
your AC power source.
To turn on the FieldVision 4K, press the power switch to
the On position. The FieldVision 4K will turn on and enter
ready mode, and the status LED will glow orange.