Cleaning, Maintenance and Storage
• The power supply must be cut off before cleaning this product.
• It is forbidden to rinse the fan body directly with water.
• Do not use any grinding tools and solvents that will damage the surface when cleaning this
product. Use detergent to clean it and wipe it with a dry cloth promptly.
• It is forbidden to disassemble the product for modification. It is recommended to inspect and clean
the product regularly to prolong its lifespan.
Cleaning and maintenance
1. Before cleaning and maintaining this product, be sure to unplug the plug and clean it after the
electrical unit is completely cooled.
2. Do not use chemical solvents such as toluene, bleach, and hard brush to avoid scratching and
corroding the appearance and color of the body. If there are stubborn dust or dirt, it is
recommended to use neutral tableware detergent to clean it.
3. When cleaning the body, please wipe it with a soft cloth dipped with neutral detergent, and then
wipe the residual detergent off with a dry cloth.
WARNING
Disassembly & assembly method
1. Disassembly of the front net: unscrew the fixing screw of the net cover with a screwdriver, turn
the front net counterclockwise until it is loose, and remove the front net. (as shown in Figure 1)
2. Please unscrew the fixed cap clockwise or rotate the fan blade counterclockwise to remove the
fixed cap and gently take out the fan blade by hand along the axial direction. (as shown in Figure 2)
3. The front net and fan blade can be cleaned with water and dried. (as shown in Figure 3)
4. The fuselage can be wiped and cleaned with neutral detergent and soft cloth.
5. After cleaning, assemble the front mesh and fan blade in the reverse direction of disassembly.
Composition of Hazardous Substances
Hg
Part Name
Motor
Hardware
χ
ס
ס
ס
ס
ס
χ
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
ס
Switch assembly
Plastic parts
Power cord
Package
Hazardous Substances
Pb
Cd
Cr(VI)
PBB
PBDE
This form is prepared in accordance to SJ / T 11364
O: Indicates that the content of the hazardous substance in all homogeneous materials of the
component is below the limit specified in GB / T 26572.
X: Indicates that the content of the hazardous substance in at least one homogeneous material of
the component exceeds the limit specified in GB / T 26572. However, with the existing technical
conditions, it is extremely difficult to make the product parts completely free of the above harmful
substances. The design will be gradually improved with the progress of technology.
The "environmental protection service life" of this product is 10 years, and its logo is
shown in the left figure. It can only be used under the normal conditions described in
this manual.
6
Do not
operate
with
wet
hands
Prohibited
Prohibited
Do not
off fan by
pulling
cord out
from the
socket
Ker
Oil
Alcohol
Open Lock
