Screen Operation
RAISING THE PROJECTION SURFACE
1. Place the screen on the floor in the desired position and
rotate the feet so that they are perpendicular to the case.
Position the screen so the audience can see the whole screen
when it is extended.
2. Release the latches and open the case cover. Push down
lightly on the center of the case lid to release the catches.
3. Grasp the bar handle and slowly raise the screen to the
desired height while keeping the top bar level. To ensure the
screen stays in good condition, only raise and lower the
screen with the bar handle located in the middle of the bar.
Note:
If the screen is slowly increasing in height due to the
pressure of the pneumatic air pistons, attach a small weight
to the bar handle to keep the screen at the desired height.
LOWERING THE PROJECTION SURFACE
1. Slowly lower the screen by pressing down on the bar
handle in the middle. To ensure the screen stays in good
condition for a long period of time, only lower the screen
using the bar handle.
2. Close the case cover and secure the latches. It may be
necessary to press down on the top of the case to get the
latches to engage properly.
3. Rotate the feet so that they are in line with the case and
out of the way before transporting.
