13-
4.3 DMX Controller
By using a universal DMX controller to control the units, you will need to set DMX address
from 1 to 512 so that the units can receive DMX signal.
Press the
MENU
button up to when the
DMX Address
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512
address. Once the address has been selected, press the
ENTER
button to setup, to go back
to the functions without any change press the
MENU
button again.
Hold and press the
MENU
button about one second or wait for one minute to exit the menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units
：
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
12channels 1
13
25
37
4.4 DMX 512 Configuration
12 channel modes
：
6-
