Elumen8 ELUM053, User Manual

Page: 4 / 17

3 A
1. Safety Information
Warning: This product is for professional use only! It is not for
household use.
The Plasma 1K White presents risks of lethal or severe injury due to fire
and heat, electric shock, ultraviolet radiation, and falls. Flashing light is
also known to trigger epileptic seizures in persons who are
photosensitive. Read this manual before powering or installing the fixture,
follow the safety precautions listed below and observe all warnings in this
manual and printed on the fixture.
Noted: high voltage in the LED board!
High power strobes, so please avoid extended periods of
continuous flashing
To guard against electric shock
—
Do not remove the rear cover: there are no user-serviceable parts inside.
—
Always ground (earth) the fixture.
—
Use only a source of AC power that complies with local building and electrical
codes and has both overload and ground-fault protection.
—
Do not expose the fixture to rain or moisture.
To guard against UV radiation, burns, and fire
—
Never operate the fixture with the front glass open, missing or damaged.
— Do not stare directly into the light. Never look at an exposed LED while it is lit.
—
Never attempt to bypass the fuse. Always replace defective fuses with ones of the
specified type and rating.
—
Verify that the power feed cable is rated for the current draw of all connected
fixtures.
—
Keep all combustible materials (for example fabric, wood, paper) at least 0.5 meters
away from the fixture.
—
Keep flammable materials well away from the fixture.
—
Minimum distance to illuminated surface is 10 meters.
—
Provide a minimum clearance of 30cm around fixture air vents.
— Never place filters or other materials over the front glass cover.
—
The exterior of the fixture can reach high temperatures. Allow the fixture to cool for